Waterproofing is an essential aspect of building construction. The waterproofing system, if done correctly, should last anywhere from 10 to 15 years. On the other hand, a badly installed waterproofing system might create water leaks quickly when it comes into contact with water; avoid such waterproofing errors. It is critical that developers, homeowners, and contractors grasp the complexity of waterproofing and do not overlook its significance.
The post mentions 3 common waterproofing mistakes that you can easily avoid,
1. Inadequate Sloping Causing Water to Stagnate
Waterproofing systems must not be exposed to water for extended periods of time; therefore, a suitable slope to drain is required to permit water discharge. Waterproofing membranes decay when exposed to water for an extended period of time; therefore, an effective waterproofing system should have an adequate slope to allow water to drain away quickly and prevent stagnant water.
2. Insufficient Surface Preparation
Surface preparation before waterproofing is critical to the overall performance of the waterproofing system. Surfaces should be cleaned to ensure that they do not have any loose particles, oil, dirt, grease, and brittle surface materials. Cleaning can be done in two ways: mechanically or chemically. High-pressure jet-washing is the most often utilised cleaning procedure.
3. Perforating the Waterproofing Membrane Post Installation
Some bathroom renovations that occur after waterproofing may infiltrate and damage the waterproofing membrane. Tiling, carpentry, and accessory installation are a few examples. If the contractors are inexperienced, they may strike a nail or drill a hole through the already constructed waterproofing membrane, puncturing it and causing the entire system to leak. Another example is roofing work where contractors may need to drill on the surface to fasten lightning lines or add wooden decking. To cover that up, they go for a waterproofing sheet for the roof, which is nothing but a compromise and may fail to offer adequate protection.
So, these are the 3 most common mistakes that you need to avoid. Besides, always choose specialized waterproofing chemicals/solutions from reputed brands like Dr. Fixit for the high-quality waterproofing of your home.
Waterproofing Solutions 